WANI (crocodile) heater for narrow pipes For small pipes
WANI Heater

Simply clip it on like an alligator clip! An insulated heater.

  • Heat resistant up to 120℃
  • RoHS compliant product
  • Original Products

WANI heaters are insulated heaters that can be easily attached to thin metal pipes and tubes by simply clipping them on like alligator clips. They are ideal for heating and insulating thin pipes ranging from 1/8 inch to 1 inch (φ6mm to φ30mm).

[Features]
■ It can be easily attached to and removed from pipes and tubes.
■ Equipped with insulation, it effectively heats and retains heat.
■ Can be attached to complex shapes.
■ It comes with a temperature sticker so you can see the temperature at a glance. (The temperature will be displayed when the surface temperature reaches 50℃ or higher.)
■ It can be connected to a temperature controller (sold separately).

  • In stock
  • Made to order

WANI (crocodile) heater for narrow pipes Order your WANI heater for narrow pipes here.

Orders can be placed for a single unit. We will propose the optimal solution tailored to your desired heating temperature, the object to be heated, and the installation environment.

There are reasons why many companies, educational institutions, and research organizations choose us.
That's because they are passionate professionals who always go to the site and find solutions .
From single-item production to mass production, we can help you solve your heat-related manufacturing challenges.

The answer is always found on the scene.

We are committed to on-site work .
We will solve the temperature problem .

Product Features

Detachable heating and warming heaters for metal pipes and tubes.

This is a heater for narrow pipes with integrated insulation, developed to reduce the temperature drop inside pipes and tubes.
1/8 to 1 inch (φ6mm to φ30mm) sizes

Insulated! Effectively heats and retains heat.

Attaching and detaching is easy with hook-and-loop fasteners; simply clip them on.

■ It can be flexibly attached to narrow pipes and tubes, such as L-shaped pipes.

Danger detection! Includes temperature sticker.

■ When the surface temperature exceeds 50°C, it will display the temperature, alerting you to the risk of accidents and burns.

Variations to choose from

■ Two versions are available: one without a temperature sensor and one with a temperature sensor (both are 100V).
■ Sizes available: 155mm x 550mm or 190mm x 550mm
(All come with a 1m lead wire.) Please choose according to your needs.

For those who would like a demo unit

■ We have various demo units available so that you can actually try them out before deciding to purchase.
Rental period: Approximately 1 week (free of charge)

Regarding temperature control

WANI heaters have heat resistance and electrical insulation properties, but they do not have a self-temperature control function. Therefore, when using them with high power density, be sure to control the heater's temperature.

*Temperature controllers: "monoOne + B/W, monoOne-120, monoOne-200"
I recommend this.

Precautions

  • Do not use at voltages above the rated voltage.
  • This product is not waterproof and cannot be used in places where it may get wet.
  • ・Be sure to install a ground connection.
  • This product is not explosion-proof and therefore cannot be used in explosion-proof areas.
  • Do not touch the device while it is powered on. There is a risk of burns.
  • Do not use in flammable, combustible, or corrosive gas atmospheres.
  • Do not disassemble or modify this product.
  • Do not pull on the power cable or thermoelectric element.
  • The information provided is subject to change without notice.

Product Specifications

kinds Heater for narrow pipes
Applicable size 1/8 inch to 3/4 inch (φ6 to φ20) / 1 inch (φ20 to φ30)
Voltage AC100V
capacity 10W / 20W / 40W
Dimensions (mm) 155x550 / 190x550 Lead wire 1m
155x550 / 190x550 Lead wire 1m ・ Temperature sensor 1m
Power cord raw edge
material Surface: Silicone glass cloth / Inner surface: Glass cloth, hook-and-loop fastener / Interior: Insulation material
How to wrap
Temperature characteristics

*The graph shows the internal surface temperature when the heater is closed.

drawing

2つのご注文方法

ORDER MADE HEATER

1.受注製作品をご希望の方はじめての
ご注文の方も

1つからオーダーメイド。
ご要望を高い精度で実現。

スリーハイの製品の大半はオーダーメイドのカスタマイズ製品です。お客様へのカウンセリングや現場訪問をもとに、1000種類以上あるスリーハイ製品の中から最もご希望に合う製品をご提案しています。

特注・オーダーメイドの詳細を見る

お電話・FAXでのお問い合わせ

0120-972-128
FAXでのお問い合わせ045-590-5571

ウェブからのお問い合わせ

お問い合わせ
ONLINE STORE

2.標準品のご購入をご希望の方在庫品は当日12時までの
ご注文で当日配送

豊富な標準品の在庫を
常にご用意しています。

スリーハイではオーダーメイト製作以外にも標準品の在庫を多数ご用意しております。目的の製品が決まっている方や2度目のご注文の方はオンラインストアからご購入ください。型番からの検索も可能です。

標準品一覧へ

オンラインストア

製品名で検索

Frequently Asked Questions

To use the heater safely,
In addition to the heater unit itself, a temperature controller and temperature sensor are required.

新規会員登録 10%OFFクーポンプレゼント
Back to top of page